Finishing off the body mounting

I seem to have spent the whole of yesterday trying to dodge the weather, everytime it rained it was down tools and push the car back in the garage, 10 mins later the sun was shining and I was pushing it back outside again. I had my Dad to help in the morning but I had to do it on my own in the afternoon. Anyway I finally got all the fixing bolts in place. I did have a little trouble lining them all up, I seemed to be able to get either the front ones, the bulkhead or the rear to line up but not all at the same time. After a quick phone call to Andy at GD to confirm, I decided to concentrate on the bulkhead fixings and get them in place first. It then took a little fettling to get the rear ones lined up but a little tickle with the small sanding drum on the Dremel saw everything fall into place. I probably opened the holes up by 1-2mm rearwards. When I finally got around to the front section. 3 of the 4 fell straight into place with no adjustment and just a little work required on the 4th so it wasn't so far out afterall. To think the body and chassis were made independently of each other and approx 3 years apart, the level of accuracy is very impressive.