Just keep chipping away...

No pictures this week, not really much to show. Just grabbed an hour or two in the garage today and finished of the wiring for the other front headlight/indicator. I also drilled the holes through the floor for the seatbelt mounts. This is just a matter of holding the mounting plates in place and using the them as a guide for the drill. I've also completed the electrical connection to the heater and began marking the dashboard ready for cutting out. The heater has three speeds but there's only provision in the GD wiring loom for two so I've connected the fastest and slowest speed terminals. It seems that later dashboards have the locations for the guages pre-marked, mine hasn't but with a bit of hunting around the other blogsites and a bit of help from the guys on the cobra club forums (www.cobraclub.com) I've got all the dimensions I need to mark them out myself.