GD427 in action

GD427 in action
Showing posts with label Cooling. Show all posts
Showing posts with label Cooling. Show all posts

Sunday, 24 April 2011

First hot run

No major progress today, had a bit of a lazy one.

I did however start the engine again but this time let it run, varying the revs a little, trying not to alienate the neighbours too much on a sunny Easter Sunday afternoon, until the fan came on at just a smidge under 90 degrees on the gauge. This was mainly because I just wanted to hear the engine again but more importantly, when I filled the radiator last time it was with just water an no antifreeze. Now I know it's unlikely to freeze at this time of year but I had a niggling worry about missing out on the anti-corrosive properties so I drained the water and refilled with a water/antifreeze mix and then of course had to start the engine to make sure it was all nicely circulated. :-) I was quite pleased to see the radiator come on. I wondered whether I'd have to recalibrate the gauge as it's running off the ECU rather than directly from a sender but it seems OK.



The other thing I did last week was to spray the side sills matt black, this part is kinda under the car and looks like it should be hidden rather than polished. Here's a quick picture to illustrate.

Sunday, 30 January 2011

A little bit of plumbing

Grabbed a little garage time today and started to put the main hoses together for the cooling system.

Before..



After...




I still need to run some additional hoses for the heater pipes but got drawn in and bought the bling polished pipes from GD. These mount to the chassis rails and just need hose connected at each end rather than a continous run of hose all the way round the front of the engine. I'll need to fix these solidly to the chassis so I'll do a little planning where to drill the holes and fit these next time.